Best FLV converter resourse share

I have often seen people asking questions like I have a Sony HDR-SR5, or some other AVCHD camcorders such as Canon HF11, JVC GZ-HD10, Panasonic HDC-SD5, etc, but I failed to import the video files copied from my camcorder in the format of .mts or .m2ts for playback on my iPod, iPhone, or some other common used mobile players, is there anyone can give me some suggestions? Question like this seems endless, for there are always people keeping asking these similar questions without an end. This time when I read this question, I couldn’t stop myself giving you people a solution.
Firstly I should tell you that most portable devices can not read .mts or .m2ts files directly, if you want to play them on your mobile devices like iPod, iPhone, etc. without trouble, you have to convert them into their acceptable format like MP4 previously.

This article aims to tell you how to convert MTS or M2TS to iPod, iPhone, etc. compatible formats with Pavtube MTS/M2TS Converter for Mac. If you are an above question asker, please read on the following step-by-step guide at will.
1. Install and run Pavtube MTS/M2TS Converter for Mac
Once you’ve run it, a sky-blue interface will appear as follow:

2. Import MTS or M2TS files to it, as well as set output format and destination folder
Click “Add” to import MTS or M2TS files, and at the same time, you can click the drop-down list of “Format” to select whatever format you need, like MP4 for iPod, iPhone, WMV for Zune player, or some other formats, what you should choose is depending on which format your portable device is supporting. Also, you can click “Browse” to decide where to load the output files. Moreover, if you want to integrate several files to be one single file, you can check “Merge into one file”.

3. Set advanced settings
If you have higher expectations about the resulted file, you can click “Settings” to adjust the parameters of video or audio on the below window. For example, you can set the screen size of the output videos, or change bit rate to adjust the quality or size of the output files.M2TS converter is a multifunctional software which helps you convert m2ts files to AVI, MPG, WMV.

4. Convert
Click button “Convert”, you will see the following window. It shows you the converting process as well as generated size and estimated size of the converting file, so that you can make sure if there ere enough space on your Mac to save the output files.in that case you are in need of a Blu-Ray to FLV converter which can help you to convert Blu-Ray movies to FLV formats. Here I would like to recommend Pavtube Blu-ray Ripper.

Additional tips:
What is MTS/M2TS?

Before talk about MTS/M2TS, AVCHD have to be mentioned at first. AVCHD is a tapeless HD format developed by Sony and Panasonic in May, 2006. AVCHD video is compressed in MPEG-4 AVC/H.264 format, and it supports 720p, 1080i, 1080p, etc. At the same time, AVCHD audio is stored in compressed form Dolby AC-3. Well, what is the relationship between AVCHD and MTS/M2TS? If you are attentive enough, you will find AVCHD is with file extension .mts on camcorder and with .m2ts after import to computer.

DVD movie still plays essential role in our audio/video daily life in spite of prosperity of online video and handheld devices. The problem is that DVD movie is not editable and you can only watch the movie the way it is presented on the disk. This is a time of individual customization and showing your own style, why not tries to edit a movie and watch it whatever way you like. To edit the DVD movie, you need to convert DVD to AVI firstly and then import the exported AVI videos to Adobe Premiere, Windows Movie Maker, and Sony Vegas etc.  First let us start from what is AVI.

About AVI
AVI stands for Audio Video Interleave Which is defined by Microsoft, it can work as a container to be embedded with different codec, such as DivX, XviD, etc. The AVI video generally brings high quality, but occupies larger disk space. It is suitable for further video editing.

To edit DVD with Windows movie maker, you need a DVD Ripper to convert DVD to AVI. This popular software offers AVI formats with various codec, which will certainly meet your needs to play, and edit video etc.

1. Run Pavtube DVD Ripper
If you have not installed it yet, please download the free trial version of Pavtube DVD Ripper.

2. Add DVD video by clicking “DVD ROM “or “DVD Folder or IFO File “.

3. Choose the AVI format on the “Format” drop down box.
There are 6 profiles with AVI as output format.Pavtube DVD Ripper offer several options for AVI with uncompressed codec and less compressed codec. The uncompressed codec is available for the profile “Losseless uncompressed avi”.The profile is set with recommended settings, and you can also change the output format by clicking the “Settings” button.There are six video codec for uncompressed AVI: BGR24, RGB555, YUY2, UYVY, and RGBA32.Channel with the video,as the effect is the same as that with RGBA32.Choose RGBA32 if there is alpha channel.

Also it offer 5 profiles for AVI with less compressed codec,AVI – Audio Video Interleaved,XVID Video,DIVX Video,AVI with DV Codec,Creative Zen Player Video.The profile for Creative Zen Player Video is particular for Creative Zen with preset image dimension and video bit rate.You can choose the codec from DivX and XviD.DV AVI can be transferred to digital camcorder.

4.Check the box to start Converting
After conversion,just click the “Open” button, and you will find the output AVI files.

Now you have got the output AVI videos, and the rest of the work goes to video editing software.Let’s take Windows movie maker for example.
Step1: Import your video. Get your video onto your computer any way you need too.Open Windows Movie Maker.

Step2: Edit your AVI video. Open your storyboard by clicking “View storyboard.” Your storyboard will be your timeline and where you will do most of your editing. For you movie folks we can call it your “cutting room floor.” To put your video in the storyboard, drag it from your library to the storyboard. Click the plus sign on your timeline so you can see video and audio lines. If you want to add extra audio to your piece, import it the same way you did your video. Faster Free Convert/Rip iPod converter MP4 formats with Great Quality and Transfer to iTunes/iPod Directly.

Step3: Play your AVI video and watch for where you want to cut and delete the extraneous video. Place your timeline cursor (the blue line that crosses perpendicular to the timeline) where you want to cut your video and split it by choosing “Edit split.” Split your original video as many times as you want. Once you split the video you see the rest of the original video in your library. Delete the video you don’t want by pressing “Delete” on your keyboard.

Step4: Add video by dragging it to the storyboard. Make sure your cursor is where you want it on the timeline because the program will automatically place your audio track where your cursor is. You will notice your audio track goes into the audio space on your timeline. To edit audio follow the same steps as the video.

Want to watch your new Blu-ray Avatar on your widescreen TV via WD HD Media Player? Actually, WD TV HD Media Player promises to play just about any video format you throw at it, including AVI (Xvid, AVC, MPEG1/2/4), MPG/MPEG, VOB, MKV (h.264, x.264, AVC, MPEG1/2/4, VC-1), TS/TP/M2T (MPEG1/2/4, AVC, VC-1), MP4/MOV (MPEG4, h.264), M2TS, and WMV9. However, commercial Blu-rays have strict copy protections, especially the new released ones, so you have to use a tool to help you remove the new BD+ copy protection implemented in BD Avatar before playing the .m2ts streams in the Blu-ray disc. Haven’t yet found an available application to do so? Don’t worry, this guide will show you how to rip Blu-ray Avatar to WD TV HD Media Player supported file formats in detail.

The BD application we will use is called Pavtube Blu-Ray Ripper, which is professional in decrypting Blu-ray copy protections, including AACS, BD+, and MKB V17.
Step 1: Download, install and launch Pavtube Blu-Ray Ripper
As soon as you run this program, click “BD/DVD ROM”, “BD/DVD Folder”, or “IFO/ISO” button to load Avatar movie files.

Step 2: Select output format for WD TV HD Media Player
Click the drop-down button of “Format” to select output format. To remain the original Blu-ray quality, you can choose “Copy”> “Directly Copy”. This option will ensure you get files in .m2ts format without any quality loss. Of course, the final file size will be very big as well.

If your WD media player is stuttering when playing back 1080p .m2ts movies, then we suggest you to convert the Blu-ray Avatar to other HD formats, which are able to keep HD quality and compress file size at the same time. Here I select “MKV HD Video(*.mkv)” as an example.

Step 3: Set advanced settings
You can click “Settings” button to adjust video and audio parameters to ensure the output HD quality. Changing video and audio codec, adjusting aspect ratio, bit rate, frame rate, sample rate, etc. are all available in the following interface.

Step 4: Start ripping Blu-ray Avatar
Once all the above settings are completed, you can click “Convert” button to start Blu-ray ripping, and the output m2ts files or HD MKV files can be found by clicking on “Open” button. After that, you can copy these files to your USB, and plug in it to WD TV HD Media Player to enjoy on your HD TV in your home theater system.

Maybe you also wanna see: how to select subtitle and audio track when ripping BD Avatar.

Learn more: Pavtube software now with support for Blu-ray Avatar

What’s your way to experience the best sales Blu-ray Avatar? As far as I know, some movie fans would like to rip BD Avatar to Apple TV for hooking up to home theater, and enjoy this splendid movie in high quality and wide screen with best friends or family members comfortably and leisurely. However, the thing is that lots of people still haven’t found out an available tool to help them to do so. In purpose of satisfying people’s requirements, this article will detail you a step-by-step instruction on how to rip Blu-ray Avatar to Apple TV via Pavtube Blu-Ray Ripper.

Let’s start.
Step 1: Download, install and launch Pavtube Blu-ray to Apple TV Converter
Once you launched it, a modern and nice designed wine red interface will show up, on which you are allowed clicking “BD/DVD ROM”, “BD/DVD Folder” or “IFO/ISO” to import Blu-ray Avatar movie files.

Step 2: Select an Apple TV preset
As soon as you click on the pull down menu of “Format”, the following interface will appear, select “Apple TV” firstly, and then choose a preset to meet your needs, here I choose “Apple TV H.264 1280×720(*.mp4)” for instance.

Meanwhile, if you want to combine all the BD Avatar files into one file, so that there are no  intervals while playback on your TV, you can tick checkbox “Merge into one file” to  achieve this goal. In addition, this program will automatically indicate a save path to store the output .mp4 files, suppose you do not like use the default path, you are allowed to specify a destination folder by yourself via hitting the folder icon at the end of “Output”.

Step 3: Set advanced settings
If you want to  adjust video and audio parameters like aspect ratio, codec, bit rate, frame  rate, etc., you can press “Settings”  button to do so. If you are not good at this, you can totally ship this step, because the default settings will absolutely guarantee you an acceptable playback quality.

Step 4: Start ripping Avatar via this Blu-ray to Apple TV Converter
Once all the above mentioned three steps are completed, you can hit “Convert” button to start Blu-ray ripping. The ripping work will be finished at speed without any audio and video out of sync issues. After done, you can click “Open” button to get the ripped Blu-ray Avatar files effortlessly. Now, just sync the files to your Apple TV with iTunes.

Learn more: Pavtube software now with support for ripping Blu-ray disc Avatar

Pavtube iMedia Converter for Mac 1.0 which is an all-around and professional tool for audio-video conversion on Mac OS. It integrates of Blu-ray Ripper, DVD Ripper and Video Converter to aim to provide Mac users with the most efficient solution for the conversion of any existing video file. Besides, the “Title Mode” and subtitles are also available.

This iMedia Converter supports for importing any Blu-rays and DVDs, no matter encrypted or non-encrypted ones, to rip or back up the whole content of Blu-ray Discs or DVDs(ISO image files included) including video/audio streams, commentary, menus, titles, ads etc. to Mac or other hard drives with just one click on “Disc Copy” Button, or directly convert Blu-ray/ DVD files or IFO files to other compatible formats with Mac, media players or video devices.

Various common video files can be added and transcoded easily between formats. Especially for TiVo shows, this tool is able to decrypt TiVo files, restore them to lossless mpg files, trim out commercials and transcode them to other regular video formats. This app still can compress HD or AVCHD videos to common videos, or re-encode them to other mainstream formats with HD quality remained. Especially those HD video footages recorded by HD Cameras or Camcorders can be converted to an editable format for non-linear edit tools like iMovie, Final Cut Express, Final Cut Pro, Final Cut Studio, Avid, Adobe premiere etc.

How to use Pavtube iMedia Converter for Mac?

1.  Import source disc/ folder/ file

Accepted sources includes blu-ray disc, blu-ray folder, DVD, DVD folder, DVD ISO image file, and Video clips. For ripping blu-ray disc you need to connect an external BD drive with your Mac. To add video files, please click ‘Add Video’ button and browse to source video files or drag and drop the files in the ‘Getting Started’ area. To load blu-ray disc, DVD, blu-ray folder, DVD folder, please click ‘DVD/ BD Folder’ and browse to the disc or directory. To import DVD image file, please click ‘IFO File’ and browse to the file you’d like to convert.

The file list is composed of five columns: Check box, Name, Duration, Trimmed Length, and Destination File.

Check Box: Click to check/ uncheck all files in the list.
Destination File: The name of the converted file. By default it is same with the original file. If you’d like to specify a different name for output file, double-click it in Destination File column and type in favorable name.

Common video files are listed for you to organize; the blu-ray or DVD movie shows up as a directory. Expand the directory and you will find all the chapters are in numerical sequence. You can convert the whole disc to movie collection or select single chapter for conversion.

For blu-ray movie, there are Title Mode and File Mode. By default the files are listed in Title Mode, all the chapters are in numerical sequence for you to check individually. For checking the subordinate chapters of certain sequence, please click its plus sign. Generally, ‘Title001’ contains the main movie, and other Titles are commentary, menus, titles and ads. By default all the Titles are selected for editing and ripping. If you want to rip the main movie and nothing more, do uncheck other sequences. If you would like to retain everything in the blu-ray disc, simply use the default settings. If you’d like to switch to file mode, please select the blu-ray movie directory and click ‘ViewMode’. And you can check and preview each individual segment. In File mode all the m2ts files in file list are checked by default. If you want to select but the main movie, a fast way is to right-click and choose ‘Uncheck All’ in shortcut menu and then check the main movie (longest m2ts file). Or simply check the small box in the title bar of the file list to check/ uncheck all.
When a blu-ray or DVD movie is loaded, you can find the Subtitle and Audio option under the file list are activated.

Subtitle: Click to view available subtitles of selected chapter and set desired subtitle from drop-down list. Note that some chapters have no subtitles at all. And you can specify subtitle of different languages for different chapters.
Audio: Click to view available audio tracks selected chapter and set desired audio from drop-down list.
Faster Free Convert/Rip iPod converter MP4 formats with Great Quality and Transfer to iTunes/iPod Directly.
2. Preview and Snapshoot

Double-click on a file to preview when you would like to preview it.
You are allowed to take snapshots when previewing the movie.

Simply click ‘Snapshoot’ button. To locate the thumbnails, please click ‘Open folder’ button. To set image format, location and size of thumbnails, please click ‘Option’ menu. In the preview window you can check the Subtitles and Audio track as well.

3. Back up DVD and blu-ray disc

iMedia Converter provides an easy and quick backup option for DVD and blu-ray disc. Protected DVDs and blu-ray discs can be cracked and copied bit-to-bit onto your hard drive in the shortest time by using ‘Disk Copy’ facility. The whole contents on the source disc will be copied to your hard drive, including the menus, titles, trailers, etc. Since the original DVD/ blu-ray structure is retained, you can burn a backup disc with the structure.

After the process completed, you may click ‘Open’ button to locate the DVD/ blu-ray directory. There should not be any quality degradation. To check the video streams, please open VIDEO_TS folder (from DVD directory) or BDMV-> STREAM folder (for blu-ray directory). The m2ts movie clips can be played with VLC player.

Finally note, blu-ray movie bites much space (generally 20Gb at least), and make sure there is enough space on your hard drive for blu-ray backing up.

Learn more: How to use Pavtube iMedia Converter for Mac